|
| |
TM 9-2320-364-20-4
11-18
11-8. AXLE NO. 4 LOCKING CYLINDER LINES AND FITTINGS REPLACEMENT
(CONT).
(7)
Remove two locknuts (11), screws (12) and
cushion clips (13) from crossmember (14).
Discard locknuts.
(8)
Disconnect air line 2359 (6) from
fitting (15).
(9)
Remove fitting (15) from tee (16).
(10)
Disconnect air line 2422 (1) from
fitting (17).
(11)
Remove fitting (17) from air
line 2069 (18).
b.
Installation.
NOTE
Install cable ties as required.
(1)
Install fitting (17) in air line 2069 (18).
(2)
Install air line 2422 (1) on fitting (17).
(3)
Install air line 2359 (6) on connector (15).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(4)
Apply sealing compound on threads of
tee (16).
(5)
Install fitting (15) on tee (16).
(6)
Install two cushion clips (13) on
crossmember (14) with two screws (12) and
locknuts (11).
|
