|
| |
TM 9-2320-364-20-4
11-25
(2)
Adjust steering stop bolt (1) and jamnut (2) on Axles No. 1 and 2 until stop bolts touch the hub
assembly (3).
(3)
Place a 1/8 by 1 by 8 in. steel plate between Axle No. 5 steering stop bolt (4) and hub assembly (5).
(4)
Adjust steering stop bolt (4) and jam nut (6) on Axle No. 5 so that stop bolt touches the steel plate.
NOTE
It may be necessary to rotate jam nut right or left 1/2 flat to permit installation of deep well
socket on jam nut.
(5)
With the aid of an assistant, turn steering wheel full left.
(6)
Tighten jam nuts (2) and (6) to 147 lb-ft (199 N.m).
|
