|
| |
TM 9-2320-364-20-4
12-6
12-2. BRAKE SHOE/SELF ADJUSTER REPAIR (CONT).
b.
Disassembly.
NOTE
Tag and mark adjusting plungers
and plunger assemblies prior to
removal.
(1)
Remove guide assembly pawls (1) and (2)
from right side of brake spider (3). Discard
pawls.
(2)
Remove adjusting bolt (4), ring seal (5),
actuator (6) and adjusting plunger (7) from
right side of brake spider (3).
(3)
Remove actuator (6) and ring seal (5) from
adjusting bolt (7).
(4)
Remove ring seal (5) from adjusting bolt (7).
Discard ring seal.
(5)
Remove ring seal (8) and plunger assembly
(9) from right side of brake spider (3).
(6)
Remove ring seal (8) from plunger assembly
(9). Discard ring seal.
(7)
Repeat Steps (1) through (6) for left side of
brake spider (3).
|
