|
| |
TM 9-2320-364-20-4
2-3035
(1) Release parking brakes
(TM 9-2320-364-10).
(2) Jack up wheel.
(3) Rotate wheel and check for bent rim.
(a) If wheel rim is bent or damaged,
perform Steps (4) and (5) below,
and replace rim (Para 13-2).
(b) If wheel rim is not bent or
damaged, perform Steps (4)
and (5) below and go to Step 3 of
this Fault.
(4) Lower wheel.
(5) Set parking brakes.
WHEEL RUNOUT INSPECTION
Truck must be on level ground and wheels must be chocked before parking brake is released. Otherwise,
truck may roll and cause injury to personnel.
Steps (1) and (5) apply only to three rear axles.
NOTE
|
