|
| |
TM 9-2320-364-20-4
12-10
12-2. BRAKE SHOE/SELF ADJUSTER REPAIR (CONT).
Use care when installing springs. Springs are under tension and can act as projectiles when
released, causing severe eye injury.
(3)
Install rear brake return spring (1) on upper brake shoe (4).
(4)
Insert loop of wire through back side of spring hole of lower brake shoe and loop over rear brake return
spring hook (1).
(5)
With the aid of an assistant, use brake spring tool to pry brake return spring (1) downward and use
loop of wire to pull rear brake return spring hook through spring hole of lower brake shoe (5) ensuring
that brake shoe (5) is positioned in adjusting bolt (2) and brake shoe (4) is positioned in plunger (8).
(6)
Remove brake spring tool from rear brake return spring (1).
(7)
Remove wire from rear brake return spring (1).
f.
Follow-On Maintenance:
Install air brake chamber, (Axle No. 1 and 2), (Para 12-9).
Install air brake chamber, (Axle No. 3, 4 and 5), (Para 12-10).
Adjust brake assembly, (Para 12-3).
Install brake drum, (Para 13-3).
Install wheels and tires, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
