|
| |
TM 9-2320-364-20-4
12-25
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
(Coat threads of upper low air switch (4) and
lower low air switch (3) with sealing
compound.
(2)
Install upper low air switch (4) in
reducer (6).
(3)
Install lower low air switch (3) in
reducer (5).
(4)
Install wire 1435 (2) and wire 1120 (1) on
upper low air switch (4).
(5)
Install wire 1435 (2) and wire 1120 (1) on
lower low air switch (3).
c.
Follow-On Maintenance:
Connect batteries, (Para 7-87).
Start engine, (TM 9-2320-364-10).
Build up air pressure to 125 psi (861 kPa).
Shut OFF engine, (TM 9-2320-364-10).
Check for air leaks, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
