| |
TM 9-2320-364-20-4
12-35
NOTE
Perform Step (h) only if collet nut is damaged.
(h)
Remove collet nut (7) from air chamber (5).
(2)
Installation.
(a)
Coat wedge assembly (9) with grease.
(b)
Install wedge assembly (9) in brake assembly (8).
NOTE
Perform Step (c) if collet nut was removed.
Install collet nut flat end first on air chamber.
(c)
Install collet nut (7) completely onto air chamber (5).
LEFT SIDE OF AXLE NO. 1 SHOWN
|