|
| |
TM 9-2320-364-20-4
12-38
Materials/Parts
Grease (Item 44, Appendix C)
Sealing Compound (Item 72, Appendix C)
Sealing Compound (Item 81, Appendix C)
Tags, Identification (Item 88, Appendix C)
Packing, Preformed (Item 260, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Air system drained, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Wheel and tire removed, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Socket Set, 3/4 in. (Item 61, Appendix G)
Socket Set, 3/8 in. (Item 62, Appendix G)
Wrench, Open End 1 1/16 in.
(Item 78, Appendix G)
Wrench, Spanner (Item 94, Appendix G)
Wrench, Torque (0 to 300 lb-ft [0 to 407 N.m])
(Item 96, Appendix G)
Wrench, Torque (0 to 60 N.m)
(Item 98, Appendix G)
12-10. AXLES NO. 3, 4 AND 5 AIR CHAMBER REPLACEMENT.
a.
Removal.
NOTE
Axle No. 3, 4 and 5 air chambers are removed the same way. Axle No. 5 is shown.
(1)
Remove nut (1), washer (2) and caging bolt (3) from storage slot in air chamber (4).
(2)
Remove plug (5) from air chamber (4).
(3)
Remove preformed packing (6) from plug (5). Discard preformed packing.
|
