|
| |
TM 9-2320-364-20-4
12-52
12-12. BALL VALVE REPLACEMENT (CONT).
(4)
Position bracket (7) in soft-jaw vise.
(5)
Remove elbow (2) from ball valve (9).
(6)
Remove ball valve (9) from reducer (10).
(7)
Remove elbow (4) from reducer (10).
(8)
Loosen jam nut (11) on reducer (10) and
remove reducer (10), lockwasher (12) and
jam nut (11) from bracket (7). Discard
lockwasher.
(9)
Remove bracket (7) from soft-jaw vise.
b.
Installation.
(1)
Position bracket (7) in soft-jaw vise.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(2)
Apply sealing compound on threads of
reducer (10).
(3)
Install reducer (10), lockwasher (12) and jam
nut (11) on bracket (7).
(4)
Install ball valve (9) on reducer (10).
(5)
Apply sealing compound on threads of
elbows (4) and (2).
NOTE
Install elbows as noted prior to
removal.
(6)
Install elbow (2) on ball valve (9).
(7)
Install elbow (4) on reducer (10).
(8)
Remove bracket (7) from soft-jaw vise.
|
