|
| |
TM 9-2320-364-20-5
14-52
14-15. STEERING HYDRAULIC RESERVOIR REPAIR (CONT).
d.
Assembly.
(1)
Position gasket (21), cover (20) and bracket (19) on reservoir (3) with 18 screws (18) and locknuts (17).
(2)
Tighten screws (18) in sequence shown and in following Steps:
(a)
Step 1: 40 lb-in (5 N.m).
(b)
Step 2: 50 to 55 lb-in (6 N.m).
(3)
Position gasket (16) and strainer (11) on reservoir (3) with six lockwashers (15) and screws (14).
(4)
Run all screws (14) down evenly until screw heads contact strainer (11).
(5)
Tighten each screw (14) one full turn.
(6)
Install preformed packing (13) on cap (10).
(7)
Install chain (12) on cap (10).
(8)
Install cap (10) on steel basket (11).
|
