|
| |
TM 9-2320-364-20-5
15-6
15-3. SKID PLATE STRUCTURE REPLACEMENT (CONT).
b.
Installation.
Skid plate structure weighs 95
lbs (43 kg). Attach suitable
lifting device prior to installation
to prevent injury to personnel.
NOTE
Make sure bottom of skid plate
structure is installed on top of
cross member.
(1)
Install two brackets (8) and four self-tapping
screws (7) on skid plate structure (1).
(2)
Attach lifting device to skid plate
structure (1).
(3)
With the aid of an assistant, position skid
plate structure (1) on truck (6).
(4)
Position four screws (5) and locknuts (4) in
top of skid plate structure (1).
NOTE
To ensure maximum
clearance between skid
plate structure and cab, pull
structure as far forward as
possible before tightening
locknuts.
Ensure there is a minimum
of 3/8 inch (9.53 mm)
clearance between skid
plate and headlights.
(5)
Position two screws (3) and locknuts (2) in
bottom of skid plate structure (1). With the
aid of an assistant, pull skid plate
structure (1) forward and tighten locknuts.
(6)
Tighten screws (5) and locknuts (4).
|
