|
| |
TM 9-2320-364-20-5
15-9
(2)
Remove four locknuts (4), screws (5) and
left and right brace assembly (6) from
crossmember assembly (7). Discard
locknuts.
(3)
With the aid of an assistant, remove four
locknuts (8), three screws (9), washers
(10), screw (11), two spacers (12) and
crossmember assembly (7) from frame
(13). Discard locknuts.
(4)
Remove four locknuts (14), screws (15)
and left and right brace assembly (6)
from left and right frame (13). Discard
locknuts.
b.
Installation.
Skid plate crossmember weighs
55 lbs (25 kg). Attach suitable
lifting device prior to installation
to prevent possible injury to
personnel.
(1)
Position four screws (15), left and right
brace assembly (6) and locknuts (14) on left
and right frame (13).
(2)
With the aid of an assistant, install cross-
member assembly (7) and two spacers (12)
with three screws (9), washers (10), screw
(11) and four locknuts (8).
(3)
Position left and right brace assembly (6),
four screws (5) and locknuts (4) on cross-
member assembly (7).
(4)
Tighten locknuts (14) and (4).
14
11
4
5
15
6
8
8
12
12
7
10
13
9
|
