|
| |
TM 9-2320-364-20-5
15-27
b.
Installation.
(1)
Position legs (3) and (4) on platform
assembly (5) with four screws (10), washers
(8), springs (9), washers (8) and locknuts
(7).
NOTE
Locknut should be tightened until
there is 2.5 in. (6.4 cm) between
inner edge of platform assembly
and outer edge of locknut.
(2)
Tighten four locknuts (7) on screws (10).
Platform assembly weighs 62 lbs
(28 kg). Attach suitable lifting
device prior to installation to
prevent possible injury to
personnel.
(3)
With the aid of an assistant, position
platform assembly (5) on mounting frame
(6).
(4)
Install four screws (2) and locknuts (1) on
legs (3) and (4).
c.
Follow-On Maintenance:
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
