|
| |
TM 9-2320-364-20-5
15-55
(5)
Remove five locknuts (11), four screws (12),
screw (13) and shank (14) from coupler (2).
Discard locknuts.
(6)
Remove roll pin (15), and locking gate (1)
from coupler (2). Discard roll pin.
(7)
Remove nut (16), pull lever (4) and roll pin
(17) from latch pin (18). Discard roll pin.
Use care when removing springs. Springs are under tension and can act as projectiles when
released and could cause injury to personnel.
(8)
Remove latch pin (18), latch (19) and spring (20) from coupler (2).
(9)
Remove roll pin (21) and key (22) from latch (19). Discard roll pin.
(10)
Remove roll pin (23) from locking lever (3). Discard roll pin.
(11)
Remove locking lever (3), pivot pin (24) and spring (25) from coupler (2).
(12)
Remove roll pin (26), pin (27) and spring (28) from coupler (2). Discard roll pin.
(13)
Remove two lube fittings (29) from coupler (2).
|
