|
| |
TM 9-2320-364-20-5
17-58
17-20. ELECTRONIC CONTROL BOX (ECB) SIDE PANEL REPLACEMENT (CONT).
NOTE
Perform Steps (2) and (3) if
equipped with LHS Controller
Protection Kit.
(2)
Disconnect wires 1755 (4) and 1755A (5)
from fuse holder (6).
(3)
Disconnect relay connector (7) from
relay (8).
NOTE
Connectors are removed by
gently prying up on tab and
pulling connectors apart.
(4)
Disconnect MC93 connector (9).
(5)
Disconnect MC94 connector (10).
(6)
Remove screw (11), lockwasher (12) and
wire 1052 (13) from panel light (14).
Discard lockwasher.
(7)
Disconnect S22 connector (15) from transfer
case lockout rocker switch (16).
(8)
Disconnect L35 connector (17) from pilot
light housing (18).
(9)
Remove screw (19), nut (20) and
rectifier (21) from side panel (2).
NOTE
Perform Step (10) only if truck is
equipped with chemical alarm
kit. If truck is not equipped with
chemical alarm kit, go to
Step (11).
(10) Disconnect C4 connector (22) and S20
connector (23) from chemical alarm rocker
switch (24).
7
12
13
14
8
9
11
6
5
4
10
|
