|
| |
TM 9-2320-364-20-5
17-65
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Apply insulation adhesive to insulation (4).
(2)
Install insulation (4) on electronic control
box panel (2).
(3)
Apply insulation adhesive to edges of
insulation (4).
(4)
Apply insulation adhesive to seal (5).
(5)
Install seal (5) on electronic control box
panel (2).
(6)
Install electronic control box panel (2) with
10 screws (1) on cab (3).
c.
Follow-On Maintenance:
Remove wheel chocks, (TM 9-2320-364-10)
END OF TASK
|
