|
| |
TM 9-2320-364-20-5
17-70
17-23. ELECTRONIC CONTROL BOX (ECB) REPLACEMENT (CONT).
(19)
Loosen screw (61) and disconnect MC25 (62).
(20)
Disconnect connectors MC11 (63) and MC40 (64).
(21)
Remove locknut (65), lockwasher (66) and wire 1435 (67) from stud (68).
(22)
Loosen screw (69) and disconnect
connector MC44 (70).
(23)
Remove nut (71), lockwasher (72),
flatwasher (73) and wire 1435 (74) from
stud (75).
(24)
Remove 14 screws (76) from electronic
control box (20).
(25)
Remove electronic control box (20) from
truck.
b.
Installation.
(1)
Install electronic control box (20) with 14
screws (76).
(2)
Install wire 1435 (73) to stud (75) with
flatwasher (73), lockwasher (72) and
nut (71).
(3)
Connect MC44 connector (70) and tighten
screw (69).
|
