|
| |
TM 9-2320-364-20-5
17-98
Materials/Parts
Locknut (9) (Item 133, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
17-36. LEFT FRONT MUD FLAP REPLACEMENT.
a.
Removal.
(1)
Remove locknut (1), screw (2) and two
washers (3), from mud flap (4), rubber
flap (5) and mud flap (6). Discard locknut.
(2)
Remove two locknuts (7), screws (8)
washers (9) and mud flap (4) from mud
flap (6). Discard locknuts.
(3)
Remove three locknuts (10), washers (11),
screws (12) and rubber flap (5) from fender
assembly (13). Discard locknuts.
(4)
Remove three locknuts (14), screws (15),
clamping plate (16) and mud flap (6) from
fender assembly (13). Discard locknuts.
b.
Installation.
(1)
Install mud flap (6) and clamp plate (16) on
fender assembly (13) with three screws (15)
and locknuts (14).
(2)
Install rubber mud flap (5) with three
screws (12), washers (11) and locknuts (10)
on fender assembly (13).
(3)
Install mud flap (4) with two washers (9),
screws (8) and locknuts (7) on rubber
flap (5).
(4)
Install two washers (3), screw (2) and
locknut (1) on mud flap (4), rubber flap (5)
and mud flap (6).
c.
Follow-On Maintenance:
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
