|
| |
TM 9-2320-364-20-5
17-109
(6)
Remove spring (16) from seat assembly (5).
NOTE
Record position of torsion
springs prior to disassembly.
(7)
Remove four locknuts (17), screws (18),
right torsion spring (19), left torsion spring
(20) and slide assembly (21) from seat
assembly (5). Discard locknuts.
(8)
Loosen jam nut (22) on rod (23).
(9)
Remove knob (24) from rod (23).
c.
Cleaning/Inspection.
(1)
Clean seat cover using soap solution.
(2)
Wipe all parts with clean cloth.
(3)
Allow all parts to air dry.
(4)
Inspect parts for damage, wear and cracks.
(5)
Replace all defective parts.
d.
Assembly.
Improper installation of springs
will damage seat assembly. Care
must be taken to ensure proper
installation.
(1)
Install knob (24) on rod (23).
(2)
Tighten jam nut (22) on rod (23).
(3)
With the aid of an assistant, install slide
assembly (21), left torsion spring (19) and
right torsion spring (20) on seat assembly (5)
with four screws (18) and locknuts (17).
(4)
Install spring (16) on seat assembly (5).
|
