|
| |
TM 9-2320-364-20-5
17-118
17-44. SEAT BELT REPLACEMENT (CONT).
b.
Installation.
NOTE
Procedure is identical for both seats. Left seat is shown.
(1)
Position D-ring (22) in cab assembly (4) with two hardened washer (25), comfort latch (24), spacer (23),
washer (21), locknut (20) and screw (26).
(2)
Tighten locknut (20) to 70 to 75 lb-in (8 N.m).
(3)
Install retractor unit (31) to cab assembly (4) with washer (29), screw (28), L-bracket (30) and locknut (27).
(4)
Tighten locknut (27) to 70 to 75 lb-in (8 N.m).
(5)
Install tether bracket (18), hardened
washer (17), seat belt bracket (16) and
hardened washer (19) on seat assembly (9)
with hardened washer (15) screw (14) and
locknut (13). Tighten locknut until seat belt
bracket can slowly rotate.
(6)
Install angled bracket (12) on cab
assembly (4) with lockwasher (11) and
screw (10).
|
