|
| |
TM 9-2320-364-20-5
17-140
17-55. CRANE STOWAGE BOX REPLACEMENT (CONT).
d.
Assembly.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
NOTE
Seal should be cut to 47 in. (119
cm) length.
(1)
Coat lip of seal (5) with adhesive and install
seal on stowage box (4).
(2)
Install two rubber latches (3) with screws (2)
and locknuts (1).
e.
Installation.
(1)
Position stowage box (5) on crane frame (6).
(2)
Install four screws (4) and locknuts (3).
(3)
Close stowage box door (2) and fasten two
rubber latches (1).
f.
Follow-On Maintenance:
Remove wheel chocks, (TM 9 2320-364-10).
END OF TASK
|
