|
| |
TM 9-2320-364-20-5
17-145
b.
Installation.
NOTE
Steps (1) through (5) are for right side cab.
(1)
Install catch bracket (40) and rifle catch (39) on angle bracket (34) with two screws (36), lockwashers (37)
and nuts (38).
(2)
Install boot (35) and angle bracket (34) with two washers (33), lockwashers (32) and screws (31) on door
assembly (29).
NOTE
If quickedge was removed, perform Step (3).
(3)
Install quickedge (30) on rifle support (24).
(4)
Install bracket (25) with two washers (28), lockwashers (27) and screws (26) on door assembly (29).
Tighten screws to 100 lb-in (11 N.m).
(5)
Install rifle support (24) with two screws (23), lockwashers (22) and nuts (21) on bracket (25). Tighten
nuts to 100 lb-in (11 N.m).
|
