|
| |
TM 9-2320-364-20-5
18-13
(2)
Remove four locknuts (3) from studs (4).
Discard locknuts.
(3)
Lift swing controller (5) away from box (2).
(4)
Disconnect swing controller connector (6)
from connector (7).
(5)
Remove gasket (8) and swing controller (5)
from box (2). Discard gasket.
NOTE
Note position of screw and lever
assembly prior to removal.
(6)
Note position and remove screw (9), lever
assembly (10) and preformed packing (11)
from swing controller (5). Discard
preformed packing.
(7)
Loosen nut (12) and remove knob (13) and
nut (12) from lever assembly (10).
(8)
Repeat Steps (2) through (7) for telescope
controller, hoist controller and boom
controller.
|
