|
| |
TM 9-2320-364-20-5
18-34
18-8. CRANE HOOK BLOCK, HOOK AND CLEVIS REPAIR (CONT).
d.
Assembly.
Use care when installing springs.
Springs are under tension and
can act as projectiles when
released and could cause injury
to personnel.
NOTE
Legs of spring must be positioned
behind latch.
(1)
Position spring (27) in latch (28).
(2)
Install latch (28) on hook (20) with
screw (26), and locknut (25).
(3)
Install pin (24) in hook (20).
(4)
Apply grease to bearing (23) and install
bearing in shield (22).
NOTE
Ensure that bearing is installed
with cup facing up.
(5)
Install hook (20) in hook block (5) with
shield (22), washer (21) and castle nut (19).
(6)
Install cotter pin (18) in slot of castle
nut (19) and hook block (5).
|
