|
| |
TM 9-2320-364-20-5
18-45
b.
Type 1 Clamp Replacement.
(1)
Removal. Remove screw (1), spacer (2) and
clamps (3).
(2)
Installation. Install clamps (3) and spacer
(2) with screw (1).
c.
Type 2 Clamp Replacement.
(1)
Removal. Remove two screws (1), spacers
(2) and clamps (3).
(2)
Installation. Install clamps (3) and spacers
(2) with two screws (1).
d.
Type 3 Clamp Replacement.
NOTE
Do not remove screw. Screw
holding clamp also holds hoist
pivot pin in place.
(1)
Removal. Remove nut (1) and clamp (2)
from screw (3).
(2)
Installation. Install clamp (2) on screw (3)
with nut (1).
|
