|
| |
TM 9-2320-364-20-5
18-75
Material/Parts
Cloth, Cleaning (Item 31, Appendix C)
Sealing Compound (Item 77, Appendix C)
This task covers:
a. Removal
c. Cleaning/Inspection
e. Follow-On Maintenance
b. Disassembly
d. Assembly
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Compressor Unit, Air (Item 11, Appendix G)
Gloves, Chemical Oil Protective
(Item 28, Appendix G)
Goggles, Industrial (Item 30, Appendix G)
Gun, Air Blow (Item 31, Appendix G)
Socket Set, 3/8 in. (Item 62, Appendix G)
Wrench, Torque (0 to 60 N.m)
(Item 98, Appendix G)
18-15. SELF-RECOVERY WINCH (SRW) REAR TENSION GUIDE REPAIR.
Material/Parts - Continued
Solvent, Drycleaning (Item 87, Appendix C)
Locknut (4) (Item 92, Appendix F) (if equipped
with CHU)
Locknut (2) (Item 123, Appendix F)
Locknut (4) (Item 132, Appendix F)
Pin, Cotter (3) (Item 272, Appendix F)
a.
Removal.
Rear tension guide weighs 50 lbs (23 kg). Use an assistant to prevent injury to personnel.
NOTE
Perform Steps (1) through (3) for trucks not equipped with CHU.
Perform Steps (4) and (5) for trucks equipped with CHU.
(1)
With the aid of an assistant, remove four locknuts (1) from screws (2) and (3). Discard locknuts.
(2)
With the aid of an assistant, support rear tension guide assembly (4).
(3)
With the aid of an assistant, remove screws (2) and (3) and rear tension guide assembly (4) from frame (5).
|
