|
| |
TM 9-2320-364-20-5
18-82
18-16. SELF-RECOVERY WINCH (SRW) REAR GUIDE REPLACEMENT (CONT).
b.
Installation.
Rear guide assembly weighs 65
lbs (30 kg). Use an assistant to
prevent possible injury to
personnel.
(1)
With the aid of an assistant, position
rear guide (3) on frame (10) with two
lockwashers (9) and screws (8).
(2)
With the aid of an assistant, position
washer (7), screw (6), washer (5) and
locknut (4) on rear guide (3).
(3)
With the aid of an assistant, position two
locknuts (2) and screws (1) on rear guide (3).
(4)
With the aid of an assistant, tighten two
screws (8) on rear guide (3).
(5)
With the aid of an assistant, tighten two
locknuts (2) and locknut (4) on rear
guide (3).
c.
Follow-On Maintenance:
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
