|
| |
TM 9-2320-364-20-5
19-3
b.
Removal (Type 2).
(1)
Remove four locknuts (5), retaining plate (6), four screws (7) and mounting plate (8) from mounting
bracket assembly (9). Discard locknuts.
(2)
Remove two locknuts (10), screws (11), reflector housing (12) and reflector (13) from mounting plate (8).
c.
Installation (Type 2).
(1)
Install reflector housing (12) and reflector (13) on mounting plate (8) with two screws (11) and
locknuts (10).
(2)
Install mounting plate (8) and retaining plate (6) on mounting bracket assembly (9) with four screws (7)
and locknuts (5).
d.
Installation (Type 1). Install reflector (3) and reflector housing (2) on cab (4) with two screws (1).
e.
Follow-On Maintenance:
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
