|
| |
TM 9-2320-364-20-5
19-14
Material/Parts
Locknut (Item 181, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
19-6. WIPER BLADE REPLACEMENT.
Do not run wiper arms when wiper blade is removed or damage to windshield and wiper arm
may occur.
(1)
Remove locknut (1) and screw (2) from wiper arm (3). Discard locknut.
(2)
Remove wiper blade (4) from wiper arm (3).
b.
Installation.
(1)
Install wiper blade (4) on wiper arm (3).
Do not over-tighten nut. Wiper arm must be able to pivot or damage may occur to parts.
(2)
Install screw (2) and nut (1) on wiper arm (3).
c.
Follow-On Maintenance:
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
