|
| |
TM 9-2320-364-20-5
19-45
(6)
Remove six screws (7), lockwashers (8), washers (9), clip (10) and heater cover (11) from heater assembly
(12). Discard lockwashers.
(7)
Remove four screws (13) from heater control
panel (14).
(8)
Rotate heater control panel (14)
counterclockwise enough for heater
core (15) to clear cables.
When heater core is removed,
coolant will drain out. To prevent
damage to electrical components,
cover all components with a thick
layer of cloths. Clean up spills
immediately.
(9)
Remove heater core (15) from heater
assembly (16) and two grommets (17).
(10)
Remove two grommets (17) from heater
assembly (16).
b.
Installation.
(1)
Drain heater core (15).
(2)
Coat two grommets (17) with soap solution
and install in heater assembly (16).
(3)
Coat heater core (15) inlet tubes with soap
solution.
(4)
Install heater core (15) in heater
assembly (16).
(5)
Install heater panel (14) and four
screws (13).
|
