|
| |
TM 9-2320-364-20-5
13-18
13-4. AXLES NO. 1, 2 AND 5 CENTRAL TIRE INFLATION SYSTEM (CTIS) SPINDLE
FITTINGS REPLACEMENT (CONT).
Table 13-1. CTIS Hoses and Tubes
Axle No.
Left Side Hose No.
Right Side Hose No.
1
2097
2097
2
2103
2099
5
2873
2109
(2)
Remove tube (3) from bulkhead fitting (2)
and tee (4).
(3)
Remove tube (5) from tee (4) and
adapters (6).
(4)
Remove tee (4) from adapter (7).
(5)
Remove adapters (6) and (7) from
spindle (8).
(6)
Remove bulkhead fitting (2), nut (9) and
lockwasher (10) from bracket (11). Discard
lockwasher.
b.
Installation.
NOTE
Install cable ties as required.
(1)
Install bulkhead fitting (2) in bracket (11) with lockwasher (10) and nut (9). Do not tighten nut.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(2)
Coat threads of adapters (6) and (7) with sealing compound.
(3)
Install adapters (6) and (7) in spindle (8).
(4)
Position tee (4) on adapters (7). Do not tighten.
(5)
Position tube (5) on tee (4) and adapter (7). Do not tighten.
(6)
Position tube (3) on tee (4) and bulkhead fitting (2). Do not tighten.
(7)
Tighten tee (4), tube (5) and tube (3) on adapter (7), adapter (6) and bulkhead fitting (2).
(8)
Tighten nut (9) on bulkhead fitting (2).
|
