|
| |
TM 9-2320-364-20-5
20-24
Materials/Parts
Lockwasher (4) (Item 168, Appendix F)
Packing, Preformed (Item 234, Appendix F)
Packing, Preformed (Item 252, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
High pressure hydraulic filter removed,
(Para 20-6)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Cap and Plug Set (Item 8, Appendix G)
Wrench, Combination 1 5/8 in.
(Item 84, Appendix G)
Wrench, Torque (0-175 lb-ft [0-257 N.m])
(Item 95, Appendix G)
20-7. HIGH PRESSURE HYDRAULIC FILTER HEAD ASSEMBLY REPLACEMENT.
a.
Removal.
Prolonged contact with
lubricating oil (MIL-L-2104) may
cause a skin rash. Skin and
clothing that come in contact
with lubricating oil should be
thoroughly washed immediately.
Saturated clothing should be
removed immediately. Areas in
which lubricating oil is used
should be well-ventilated to keep
fumes to a minimum.
NOTE
Tag and mark all hydraulic
hoses prior to removal.
Cap and plug all hydraulic
hoses to prevent
contamination.
(1)
Remove hose 2936 (1) and preformed
packing (2) from elbow (3). Discard
preformed packing.
|
