|
| |
TM 9-2320-364-20-5
20-57
b.
Installation.
(1)
Remove cover from opening on hydraulic
reservoir (5).
(2)
Apply lubricating oil to preformed packing
(7) and install on cap (1).
(3)
Install chain (6) on cap (1).
(4)
Position gasket (4) and strainer (3) on
hydraulic reservoir (5) with six screw and
washer assemblies (2).
(5)
Tighten screws (2) down evenly until screw
heads contact strainer top (3).
(6)
Tighten each screw (2) one full turn.
(7)
Install cap (1) on strainer (3).
c.
Follow-On Maintenance:
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
