|
| |
TM 9-2320-364-20-5
21-38
21-10. ARCTIC KIT SWITCH WIRE HARNESS REPLACEMENT (CONT).
NOTE
Tag and mark all wire connectors.
Cut cable ties as required.
(4)
Disconnect MC119 connector (9).
(5)
Disconnect S 29 connector (10) from arctic pump switch (11).
(6)
Disconnect arctic pump switch light (12) from arctic pump switch (11).
(7)
Remove two locknuts (13), screws (14) and arctic pump relay sockets (15) from front heater control
panel (8). Discard locknuts.
b.
Installation.
NOTE
Install cable ties as required.
(1)
Install arctic pump relay sockets (15), two screws (14) and locknuts (13) on front heater control panel (8).
(2)
Connect arctic pump switch light (12) on arctic pump switch (11).
(3)
Connect S 29 connector (10) on arctic pump switch (11).
(4)
Connect MC119 connector (9).
|
