|
| |
TM 9-2320-364-20-5
21-81
(2)
Install valve (7) into auxiliary supply valve
(9).
(3)
Install coil (4) on valve (7) with nut (8).
Tighten nut to 48-72 lb-in (5-8 N.m).
(4)
Install button (6) on valve (7) with screw (5).
(5)
Install gasket (3) and connector MC134 (2)
on coil (4) with screw (1).
c.
Follow-on Maintenance:
Fill main hydraulic reservoir, (Para 20-11).
Connect batteries, (Para 7-87).
Start engine and allow to idle for five minutes, (TM 9-2320-364-10).
Shut off engine and check for hydraulic leaks, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
7
9
8
6
4
5
3
4
1
2
|
