|
| |
TM 9-2320-364-20-5
13-36
13-9. CENTRAL TIRE INFLATION SYSTEM (CTIS) REAR MANIFOLD
REPLACEMENT (CONT).
(11)
Remove four locknuts (27), screws (28) and
CTIS manifold bracket (29) from CTIS rear
manifold (19). Discard locknuts.
(12)
Remove exhaust tube (30) and fitting (31)
from CTIS rear manifold (19).
(13)
Remove elbow (33), elbow (34), elbows
(32) and (35) and plugs (36) and (37) from
CTIS rear manifold (19).
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
NOTE
Ensure elbows, fittings and tubes
are installed as noted prior to
removal.
(1)
Apply sealing compound on threads of
plugs (36) and (37).
(2)
Install plugs (36) and (37) in CTIS rear
manifold (19).
(3)
Apply sealing compound on threads of
elbows (32) and (35).
(4)
Install elbows (32) and (35) in rear CTIS
(5)
Apply sealing compound on threads of elbow (34).
(6)
Install elbow (34) in CTIS rear manifold (19).
(7)
Apply sealing compound on threads of elbow (33).
(8)
Install elbow (33) in CTIS rear manifold (19).
(9)
Apply sealing compound on threads of fitting (31).
(10)
Install fitting (31) in CTIS rear manifold (19).
(11)
Install exhaust tube (30) on fitting (31).
(12)
Install rear CTIS manifold (19) on CTIS manifold bracket (29) with four screws (28) and locknuts (27).
|
