|
| |
TM 9-2320-364-20-5
21-98
21-24. CONTAINER HANDLING UNIT (CHU) PROXIMITY SWITCH AND SENSING
PLATE REPLACEMENT/ADJUSTMENT (HOOK ARM UP) (CONT).
(2)
Remove two nuts (3) and proximity switch
(4) from proximity switch mount (5).
(3)
Remove two screws (6), lockwashers (7) and
proximity switch mount (5) from two clamp
halves (8). Discard lockwashers.
NOTE
Perform Step (4) if sensor plate is
damaged.
(4)
Remove sensor plate (9) from LHS hook
arm (10).
b.
Installation.
NOTE
Perform Steps (1) through (20) if sensor plate was removed.
LHS is being raised to expose area to install sensor plate.
(1)
Start engine and stow LHS (TM 9-2320-364-10).
9
3
4
8
5
7
6
3
10
|
