|
| |
TM 9-2320-364-20-5
21-105
(2)
Remove two screws (3), locknuts (4) and
mode switch (5) from left rear roller bracket
(6). Discard locknuts.
b.
Installation.
(1)
Install mode switch (5), two screws (3) and
locknuts (4) on left rear roller bracket (6).
Do not tighten locknuts.
(2)
Connect MC189 connector (1) to CHU wire
harness (2).
c.
Adjustment.
(1)
Remove quick release pin (1) and pin (2)
from left side short strut (3) and long strut
(4).
(2)
With the aid of an assistant and using handle
of arm assembly (5), rotate arm assembly out
and separate short strut (3) from long strut
(4).
(3)
With the aid of an assistant holding arm
assembly (5), position flip lock (6) up.
3
4
5
6
1
2
3
1
2
4
6
5
|
