|
| |
TM 9-2320-364-20-5
21-107
(8)
Measure distance between short strut (3) and
mode switch bracket (11).
NOTE
If gap between short strut and
mode switch bracket is not
7/16 in. 1/16 in. (1.59 mm),
perform Step (9).
If gap between short strut and
mode switch bracket is 7/16
in. 1/16 in. (1.59 mm), go
to Step (10).
(9)
Position mode switch (12) to dimension
shown.
(10)
Tighten two screws (13) and lock nuts (14)
on mode switch (12) and rear roller bracket
(15).
(11)
Deploy left arm assembly (TM 9-2320-364-10).
d.
Follow-on Maintenance:
Connect batteries, (Para 7-87).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
11
3
13
14
15
12
7/16 IN. 1/16 IN.
(11.11 MM 1.59 MM)
|
