|
| |
TM 9-2320-364-20-5
13-39
Materials/Parts
Sealing Compound (Item 72, Appendix C)
Tags, Identification (Item 88, Appendix C)
This task covers:
a. Disassembly
c. Assembly
b. Cleaning/Inspection
d. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Front or rear manifold removed,
(Para 13-8 or 13-9)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
13-10. CENTRAL TIRE INFLATION SYSTEM (CTIS) FRONT AND REAR
MANIFOLD REPAIR.
Materials/Parts - Continued
Kit, Fasteners and Seal (Item 36, Appendix F),
(Front manifold only)
Kit, Fasteners and Seal (Item 37, Appendix F),
(Rear manifold only)
Lockwasher (Item 187, Appendix F)
a.
Disassembly.
NOTE
Tag and mark all wires and
connectors prior to removal.
(1)
Loosen two screws (1) and remove
connectors (2) and gaskets (3) from inflation
valve (4) and deflation valve (5). Discard
gasket.
(2)
Loosen screw (6) and remove connector (7)
and gasket (8) from quick release valve (9).
Discard gasket.
(3)
Disconnect connector (10) from
transducer (11).
NOTE
Perform Step (4) for front power
manifold.
(4)
Disconnect connector (12).
NOTE
Rear power manifold will have
only one wire in Step (5).
(5)
Remove screw (13), lockwasher (14), wire
(15), and wire (16) from power manifold
(17). Discard screw and lockwasher.
|
