|
| |
TM 9-2320-364-20-5
21-115
NOTE
There are seven red marker
lights. All red marker lights
are removed the same way.
Remove cable ties as
required.
Loop clamp is removed by
first pulling out lock button
and then removing loop
clamp.
Note position of wires and
ground wires prior to
removal.
(2)
Remove push clip (2) and two wires 489 (3)
from rear light bar assembly (4).
(3)
Disconnect wire 1012 (5) from wire 489 (3).
NOTE
Perform Steps (4) through (6)
for marker light with lamp.
Perform Steps (7) through (9)
for marker light with LED.
(4)
Remove two screws (6) and lens cover (7)
from marker light assembly (8).
(5)
Remove marker lamp (9) from marker lamp
socket (10).
(6)
Remove two locknuts (11), wire 1435 (12),
two screws (13), marker light assembly (8)
and gasket (14) from marker light bracket
(15). Discard locknuts.
7
6
8
9
10
11
3
13
14
15
2
3
4
5
3
12
|
