|
| |
TM 9-2320-364-20-5
21-140
21-30. CONTAINER HANDLING UNIT (CHU) SHORT STRUT AND PIN BRACKET
ASSEMBLY REPAIR (CONT).
d.
Assembly.
NOTE
Perform Steps (1) through (7)
only if components were
removed.
(1)
Install flip lock (12) to pin bracket (15) with
roll pin (13) and pin (14).
(2)
Position jam nut (11) on screw (10) and
install screw (10) on flip lock (12). Do not
tighten nut.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound gets
on skin or clothing, wash
immediately with soap and water.
(3)
Apply a light coat of antiseize to outer
surface of bearing (9).
(4)
Install bearing (9), spacer (8) and retaining
ring (7) in short strut (5).
(5)
Install grease fitting (6) in short strut (5).
(6)
Apply sealing compound to threads of screw
(1).
(7)
Install spring (4), washer (3), washer (2) and
screw (1) on short strut (5).
14
13
15
10
11
12
1
2
3
6
9
4
5
8
7
|
