|
| |
TM 9-2320-364-20-5
21-149
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound gets
on skin or clothing, wash
immediately with soap and water.
NOTE
Sealing compound is applied to
metallic side of thrust washer.
(7)
Apply sealing compound (loctite 680) to
thrust washer (2).
(8)
Apply adhesive (loctite 409) to six points in
recessed groove for preformed packing (3).
NOTE
Thrust washer is properly
installed with metallic side to arm
assembly.
(9)
Install preformed packing (3), thrust washer
(2) and seal (1) on assembly (4).
2
3
1
|
