|
| |
TM 9-2320-364-20-5
13-43
(7)
Install plunger (36) and preformed packing
(35) in spool (32).
(8)
Install diaphram (34), seal ring (33) and
spool (32) in power manifold (17).
(9)
Install orifice (31) in power manifold (17).
(10)
Install valve (30) and preformed packing
(29) in spool (27).
(11)
Install diaphram (28) and spool (27) in
power manifold (17).
(12)
Install quick release solenoid (26) on power
manifold (17) with nut (25).
(13)
Install inflation valve solenoid (23) and
deflation valve solenoid (24) on power
manifold (17) with washers (22), washers
(21) and nuts (20).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
NOTE
Perform Steps (14) and (15) for
front power manifold.
(14)
Apply sealing compound on threads of
pressure switch (19).
(15)
Install pressure switch (19) in power
manifold (17).
(16)
Apply sealing compound on threads of
relief valve (18).
(17)
Install relief valve (18) in power
manifold (17).
(18)
Apply sealing compound on threads of
transducer (11).
(19)
Install transducer (11) in power
manifold (17).
|
