|
| |
TM 9-2320-364-20-5
21-160
21-33. CONTAINER HANDLING UNIT (CHU) LONG STRUT BRACKET ASSEMBLY
REPAIR (CONT).
(3)
Remove grease fitting (6) from end of
long strut (4).
Use care when removing snap
and retaining rings. Snap and
retaining rings are under spring
tension and can act as projectiles
when released and could cause
severe eye injury.
(4)
Remove retaining ring (7), spacer (8) and
bearing (9) from long strut (4).
(5)
Remove wire rope (10), quick release pin
(11), and pin (12) from cushion clip (13).
NOTE
Perform Step (6) if wire rope is
damaged.
(6)
Remove two swaging sleeves (14) from wire
rope (10).
NOTE
Perform Steps (7) and (8) if
pin end is damaged.
Screw is used to secure pin
end to long strut.
Note position of pin end prior
to removal.
(7)
Remove screw (15) and cushion clip (13)
from long strut (4).
(8)
Remove pin end (16) from end of long strut
(4).
10
16
11
12
4
15
13
6
7
8
9
14
14
|
