|
| |
TM 9-2320-364-20-5
21-165
f.
Adjustment.
(1)
Deploy both slider assemblies by extending short and long struts (TM 9-2320-364-10).
(2)
With the aid of an assistant, measure distance between center of slider pivot pins (1).
NOTE
Adjustment of struts is performed in Steps (4) through (13).
If distance measured is 88.62 in. to 89 in. (225.09 cm to 226.06 cm), no adjustment is
required.
(3)
Adjust long struts (2) so distance measured is 88.62 in. to 89 in. (225.09 cm to 226.06 cm) between slider
pivot pin (1) centers.
2
1
1
88.62 IN. to 89.0 IN.
(225.09 CM to 226.06 CM)
|
