|
| |
TM 9-2320-364-20-5
21-171
d.
Assembly.
NOTE
Perform Step (1) if tether pin
was removed.
Wire rope is positioned
through hole in bottom of
stow weldment.
(1)
Attach two tether pins (12) and quick
release pins (13) to bottom of stow
weldment (4) with two wire ropes (11)
and four swaging sleeves (10).
(2)
Position two lifting frame stow hooks (9)
on stow weldment (4) with eight screws (7)
and locknuts (8). Do not tighten.
NOTE
Perform Step (3) if wire ropes
were removed.
(3)
Attach two wire ropes (6) with four swaging
sleeves (5) to pins (2) and snap pins (1).
(4)
Install two rail transport struts (3) on stow
weldment (4) with four pins (2) and snap
pins (1).
4
5
6
1
2
3
7
8
9
12
5
5
6
5
1
10
11
13
2
10
|
