|
| |
TM 9-2320-364-20-5
13-46
13-11. CENTRAL TIRE INFLATION SYSTEM (CTIS) WHEEL VALVE REPAIR (CONT).
(2)
Remove valve stem dust cap (3) from valve
stem (4).
Ensure all personnel wear proper
eye protection. Do not stand
directly in front of valve stem
when draining air from tire. Tire
is under extreme air pressure.
Failure to comply may result in
injury to personnel.
(3)
Remove valve core (5) from valve stem (4)
and allow air to drain from tire (2). Discard
valve core.
NOTE
Cap and plug hoses and fittings
after removal.
(4)
Remove two hoses (6) from fittings (7).
(5)
Remove two tubes (8) from wheel valve (9).
(6)
Remove and discard two preformed
packings (10) from tubes (8).
(7)
Remove two lug nuts (11) and mounting
bracket (12) from studs (13).
(8)
Remove two locknuts (14), screws (15) and
wheel valve (9) from mounting bracket (12).
Discard locknuts.
(9)
Position wheel valve (9) in soft jawed vise.
(10)
Remove valve stem (4) from elbow (16).
(11)
Remove two fittings (7) and elbow (16)
from wheel valve (9).
(12)
Remove wheel valve (9) from soft jawed
vise.
|
