|
| |
TM 9-2320-364-20-5
21-192
21-38. CONTAINER HANDLING UNIT (CHU) LIFTING FRAME FLIPPER BRACKET
AND LOCK PLATE REPAIR.
This task covers:
a. Removal
c. Installation
e. Follow-On Maintenance
b. Cleaning/Inspection
d. Adjustment
INITIAL SETUP
Materials/Parts (cont)
Lockwasher (2) (Item 172, Appendix F)
Cotter pin (2) (Item 267, Appendix F)
Cotter pin (Item 268, Appendix F)
Spring pin (2) (Item 285, Appendix F)
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Remove lifting frame from truck,
(TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Compressor Unit, Air (Item 11, Appendix G)
Gloves, Chemical Oil Protective
(Item 28, Appendix G)
Goggles, Industrial (Item 30, Appendix G)
Gun, Air Blow (Item 31, Appendix G)
Materials/Parts
Antiseize Compound (Item 21, Appendix C)
Sealing, Compound (Item 83, Appendix C)
a.
Removal.
Use care when removing springs.
Springs are under tension and can
act as projectiles when released
and could cause injury to
personnel.
NOTE
There are two flipper pin
brackets. Both are removed the
same way. Left side is shown.
(1)
Remove cotter pin (1), flipper lock pin (2),
spring (3) and lock handle (4) from flipper
pin bracket (5) and lifting frame (6).
Discard cotter pin.
5
6
4
1
3
2
|
