| |
TM 9-2320-364-20-5
13-48
13-11. CENTRAL TIRE INFLATION SYSTEM (CTIS) WHEEL VALVE REPAIR (CONT).
d.
Assembly.
(1)
Install check valve (12) and breather (13) in
wheel valve (6).
(2)
Install preformed packing (11) on piston
(10).
(3)
Install piston (10) in wheel valve (6).
(4)
Install new diaphragm (4) and pilot end
cover (5) on wheel valve (6) with four
screws (7).
(5)
Install poppet (6), preformed packing (4),
spring (3) and poppet end cover (2) on wheel
valve (6) with four screws (1).
e.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Position wheel valve (9) in soft jawed vise.
(2)
Apply sealing compound on threads of
elbow (16).
(3)
Install elbow (16) in wheel valve (9).
(4)
Apply sealing compound on threads of valve
stem (4).
(5)
Install valve stem (4) in elbow (16).
(6)
Apply sealing compound on threads of two
fittings (7).
(7)
Install two fittings (7) in wheel valve (9).
(8)
Remove wheel valve (9) from soft jawed
vise.
|